CEM Corporation

Products & Services Support About Events Contact

Moisture/Solids analysis

Product Information

Learning Center

CEM Corporation

McCormick Place, Lakeside Chicago, IL

10/15/2008 -
10/17/2008

Dry your samples in minutes!

The SAM-255 now with IntelliTemp Infrared temperature control provides rapid drying of all types of samples. The SAM-255 Workstation can analyze large-sized samples for moisture or solids.

Intellitemp provides consistent drying every day, every batch
Works great with paint bases and colors
Ideal for powdered milk
Reduce drying times from hours to minutes
- Drying comparable to standard air oven method.
- Consistent reproducible results
Stores up to 20 separate methods
Each method can have up to 8 heating, cooling or heat ramping stages

Time and power selections are independently programmed for each stage. The powerful, variable-speed exhaust system moves air through the cavity quickly to aid in drying and can be connected to an existing laboratory exhaust when drying organic compounds.

Intellitemp™ Makes the Difference
This remarkable system has the patented Intellitemp temperature feedback system which controls microwave energy to maintain a user-defined temperature set-point for verifiable temperature control and repeatable conditions for every test. Incoming line voltage fluctuations are compensated for, providing consistent results unit-to-unit and site-to-site.

Accessories

^top of page^

SAM-255 Work Station SAM-255’s are available with workstation options including a balance and printer. The SAM-255 Workstation is a complete center for accurate moisture or solids measurements in large samples. The system utilizes the SAM-255’s built-in serial and parallel ports to connect to a balance for weighing and a printer for complete documentation of the process to assist you in complying with ISO and other QC requirements.

The SAM-255 Workstation uses a 100 g balance with 0.0001 g sensitivity for sample weighing. The balance communicates directly with the SAM-255 by a RS-232 port. Once the sample has completed the drying process and has been reweighed, the user can choose to print the sample results and information with the Workstation’s printer.
SAM255

Draw-Down Card Holder The ideal solution for proper positioning of the draw-down card in the SAM-255

Bulk Drying Turntable A two-tier drying basket that holds up to 1,000 g of material to be dried.

Glass Fiber Sample PadsCEM sample pads consistently provide the test accuracy and precision demanded by your Process and Quality Control Laboratory. We manufacture our sample pads in a controlled environment to avoid excess moisture, which can cause erratic and inconsistent numbers. Our pads are tested to ensure they meet strict requirements for absorbency, moisture content and mechanical strength.

Our pads are designed to hold a variety of sample types including solids, liquids and slurries. CEM sample pads are approved to be used with AOAC Methods and are manufactured in our ISO-9001:2000 approved manufacturing facility.

Square Pads (4x4 in)      400/box
11 cm Round Pads         200/box
9 cm Round Pads           200/box
Glass Fiber Liner             Box of 100 liners for bulk drying

Calibration

CEM offers accessories for the calibration and verification of the temperature control circuitry to meet governmental regulations for various applications. Calibration Source Instrument (NIST traceable)The calibration source instrument and built-in system software allow rapid calibration of the temperature control circuitry of the SAM-255 Systems. A NIST traceable certificate of calibration is supplied with the instrument.